■ Operation of internal controls
1. Raise and lower control lever (The lever has four positions)
A. Rapid ground entry. When released in this position, the lever automatically returns to position (B).
B. Lift arm lowering.
C. STOP
D. Lift arms raised (the Transit safety lock is engaged in this position).
– Turn clockwise for minimum working depth.
– Turn counterclockwise to work in position control.
3. Lift arms top limit adjustment knob.
– Turn to the right for lift arms minimum upward travel.
– Turn to the left for lift arms maximum upward travel.
4. Arms descent speed adjustment knob.
– Turn upwards, towards the hare symbol for maximum lift arms descent speed.
– Turn downwards, towards the tortoise symbol for minimum lift arms descent speed.
5. Position/draft mixing knob.
– Turn counterclockwise to work in draft control.
– Turn clockwise to work in position control.
■ Exterior raise and Lower control button
Exterior raise and lower control button is located on the both side of the rear
mudguard and control the 2 positions (Upward/Downward)
To Next Page
Loading...
