►
►►
► TRANSMISSION CONTROL UNIT(TCU) SWITCH PANEL
■ Differential lock switch
In case of wheel slippage use the diff-lock by pressing the Diff-lock switch.
To release, Press again the Diff-lock panel.
50
①
①①
① Differential Lock AUTO mode switch
If the angle of both front wheel is over 20 degrees,
Differential Lock will automatically disengage.
②
②②
② Differential lock MANUAL mode switch
Push the Diff. Lock manual mode switch.
Indicator will illuminate and will be operated.
■ Differential lock operation
It is advisable to lock the differential in the following situations
– when ploughing, to prevent the wheel that is not in the furrow from slipping;
– when one of the drive wheels is on uneven, muddy or slippery ground and tends to slip.
■ The Differential lock will disengage as flows. (Auto&Manual modes)
– Brake Pedals are in the released position.
– Travel speed exceeds 15 Km/h.
Auto mode Manual mode
To Next Page
Loading...
