EasyManua.ls Logo

TYM T1003 - Page 75

TYM T1003
130 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Changing engine oil.
Park tractor on level surface, shut-off engine
Remove Engine oil drain plug & Drain oil.
Replace and check the Engine oil drain and refill the engine
with oil to the correct level on the dipstick (approx. 1.85 gal).
The grade of oil to be used will depend on the ambient
temperature.
The tractor is shipped from the factory with 15W/40
For summer use over 77 use SAE 30
For temperatures from 32-77 use SAE20 or 15W/40
For temperatures below 32
use SAE 10W
CHANGING THE OILS IN THE TRACTOR
Always use quality oils as engine or transmission oil.
Refer to the table on page 68,69 and 70 for the change
frequency.
74
Important
When changing the oil always change the filter.
Always use the same oil, as using different oils or specifications can cause damage.
Dispose off the old oil as per local regulations.
Changing the transmission oil
Remove the drain plug from bottom of the transmission and drain the oil.
Replace and check the drain plug.

Related product manuals