Never use petrol (gasoline) thinner or similar inflammable material to wash the
primary fuel filter.
After replacing the filter always bleed the system
important
►
►►
► HYDRAULIC OIL FILTER AND ENGINE OIL FILTER CARTRIDGE
Remove the filter with a filter wrench.
To replace, apply oil or grease on the seal, fit by hand until seal contacts bare, then turn it 2/3
rd
turn further
to tighten it check for leaks.
77
■ High Pressure Filter
-Indicator is shown the RED Color after starter, Replace the Element.
1. After stopping the Engine, Turn clockwise to open the cover.
2. Pull downward the Cartridge to remove.
3. Lubricate the O-ring and Tighten the element.
(Replace the Element)
4. Clean the cover with clean oil.
Tighten the Cover with a suitable tool.
5. Check the Indicator is to be colored the Green.
To Next Page
Loading...
