TYM T1003 - CABIN INTERNAL CONTROLS AND SYSTEMS

■ Rearview Mirrors
The cab is provided with rearview mirrors on both sides.
They can be adjusted, whenever necessary,
to avoid interference with external obstacles.
The mirror have a telescopic arm to allow positioning
for maximum convenience by the user.Remember
that mirrors must always be positioned
in compliance with road traffic regulations
when driving on a public highway.
■ Internal Rearview Mirror
Adjust the Internal Rearview Mirror turning it
into position on its supporting arm.
■ Cab ceiling
The ceiling is padded with insulation material to block heat radiation into the cab and keep the temperature
91
The ceiling is padded with insulation material to block heat radiation into the cab and keep the temperature
down when working in very sunny areas.
The cab platform is covered with a “firm grip” carpet in the most commonly used areas.
It is recommended to keep this carpet clear of earth, mud, etc. So that the operator may get on and off the
tractor in full safety.