TYM T450 - Section 2. Specifications

4-2
SECTION 2. SPECIFICATIONS
260X170(10.24X6.69)Outer dia. ×inner dia. mm(in)
Clutch disc
.
607.6(94.2) in both facesEffective friction area ㎠(sq.in)
53/64.4(2.09/141.7)Installed length/Load mm/Kgf(in/lb)
Coil spring
9
87.4(3.44)
Springs: shape
Quantity
Free length mm (in)
TypeClutch cover
35.0(1.378)
31.7(1.248)
19
Hub spline: large dia. mm(in)
Small dia.mm(in)
No. of splines
0.7(0.028)or lessLever height difference limit between levers mm(in)
65±0.7(2.5590Lever plate height(above flywheel surface)mm (in)
2.0 (0.079)Clearance between lever plate
and release bearing mm (in)
Clutch pedal
Ø25.0 (0.984)Large dia. mm (in)spline hub
Y02Facing material
Dry single plateType
20∼30 (0.79∼1.18)Clutch pedal free play mm (in)
0.7 (0.028) or lessLateral deviation mm(in)
8.0±0.3 (0.315)Disc thickness (free) ㎜ (in)
Ø21.7 (0.854)Small dia.mm (in)
1.0 (0.039) or lessVertical deviation mm (in)
0.4 (0.016)or lessSurface deviation mm (in)
13No.of splines
Description and
assembly standard values
ItemsParts
Table 4-1