38
► PANEL INSTRUMENT LAMP
Charge lamp
This light will go off as soon as the engine starts to run to indicate that the alternator is changing.
(Please note, as broken fan belt can cause the light to come on, please stop the engine as
overheating can occur if not rectified immediately)
Oil pressure lamp
Will go out as soon as the engine starts if the oil pressure is correct.
If it comes on while the engine is running, stop the engine and get expert advice.
PTO monitor Lamp
Shows the revolution of PTO. Refer to monitor lamp on Page 40
High beam lamp is operated on the combination switch.
Low beam lamp is operated on the combination switch
Glow signal Lamp indicates preheating
Parking brake is operated when footbrake is engaged.
Fuel Level
If it comes on while the engine is running, Fill the tank with fuel.
To Next Page
Loading...
