TYM T25NH User Manual (English)

Questions and Answers:

M
Mary TaylorAug 18, 2025
What to do if the oil warning lamp comes on during driving my TYM T25NH Tractor?
- A
  Alexander WhiteAug 18, 2025
  If the oil warning lamp illuminates while driving your TYM Tractor, it could indicate a few issues. First, check the engine oil level and add oil to the specified level if it's low. It might also be due to low viscosity of the engine oil, in that case, change the oil with proper viscosity. A faulty pressure switch could also be the cause, so replace the switch. Other potential causes are a defective oil pump or a clogged oil filter element, which should be repaired or replaced by a workshop.
M
Mr. Craig RiosAug 20, 2025
What to do if the charge warning lamp comes on while driving my TYM T25NH Tractor?
- N
  Nathaniel PattonAug 20, 2025
  If the charge warning lamp comes on during driving your TYM Tractor, there are several possible causes. It could be due to defective wiring, so check for loose or missing terminals, short circuits, and poor grounding, and repair as necessary. Another cause might be a defective alternator, which should be repaired by a workshop. A defective battery or insufficient distilled water can also trigger the lamp, so replace the battery or add distilled water. Lastly, a loose or damaged fan belt could be the problem, so adjust the tension or replace the belt.
N
Nicole PowellAug 23, 2025
What to do if my TYM Tractor engine runs irregularly?
- J
  Jasmine DelgadoAug 23, 2025
  If your TYM Tractor engine is running irregularly, it could be due to several reasons. One possibility is air in the fuel system, in which case you should bleed the system. Another cause could be a clogged fuel filter, so clean or replace the filter. Also, check if there is no fuel supply, and if so, open the cock and add fuel. In case of a defective engine or key stop unit, have it repaired or replaced by a workshop.
K
kknightAug 26, 2025
Why is the steering wheel so heavy on my TYM T25NH Tractor?
- A
  Adam YorkAug 26, 2025
  A heavy steering wheel on your TYM Tractor can be attributed to several factors. First, check the toe-in and adjust if it's improper. Next, ensure that the tire inflation pressure is correct and set the left and right tires to the same specified pressure. Finally, inspect each connection for vibration and tighten or replace the connection as needed.
J
jose46Aug 28, 2025
What to do if the brake does not operate on my TYM Tractor?
- T
  tgonzalezAug 28, 2025
  If the brake on your TYM Tractor does not operate, or only one side operates, there are a few potential causes. It could be due to excessive brake pedal free play, so adjust the free play. Another cause might be a worn or seized liner, which should be repaired by a workshop. Finally, different play of left and right pedals can cause this issue, so set the left and right free play to the same.
R
Roger AdamsAug 31, 2025
What to do if the brake pedal does not return to its original position properly on my TYM T25NH?
- J
  Joshua TorresAug 31, 2025
  If the brake pedal on your TYM Tractor isn't returning to its original position, it could be due to a damaged brake return spring, so consider replacing the spring. Another possibility is a lack of grease on the sliding part, in which case you should remove rust and apply grease.
Y
youngmarkSep 2, 2025
What causes oil leaks from the pipe or hose on TYM T25NH Tractor?
- J
  jamesstewartSep 2, 2025
  Oil leaks from the pipe or hose on your TYM Tractor can be caused by several factors. These include: 1. Insufficient engine RPM, so set the speed to 1,000 to 1,500 RPM. 2. Insufficient transmission fluid, so add to the specified level. 3. Air sucked into suction pipe, so tighten the connection. Other potential causes, such as a clogged oil filter, defective hydraulic pump, defective valve, or damaged cylinder, should be repaired by a workshop.
T
Tiffany HartSep 5, 2025
Why is the headlamp on my TYM T25NH Tractor not producing enough light?
- B
  Brandy AllenSep 5, 2025
  If the headlamp on your TYM Tractor isn't producing enough light, it could be due to a low charging level of the battery, so try charging it. Alternatively, there may be a contact failure in the wiring, so check, clean, and re-tighten the ground and terminal.
S
Samantha BellSep 7, 2025
What to do if the hydraulic pressure won’t be decreased on my TYM Tractor?
- E
  Eddie BarnettSep 7, 2025
  If the hydraulic pressure won’t be decreased on your TYM Tractor, it could be due to loose clamps, so tighten them. Another cause might be cracked pipes, which should be replaced by a workshop.
S
seanbookerSep 9, 2025
What to do if the headlamp does not come on in my TYM Tractor?
- J
  johnsonjoelSep 10, 2025
  If the headlamp does not come on in your TYM Tractor, it could be due to a blown bulb, so replace the bulb. It may also be a blown fuse, so check the wiring and replace the fuse. Another possibility is a contact failure, so check and clean the ground and terminal.

TYM T25NH Specifications

General

Brand	TYM
Model	T25NH
Category	Tractor
Language	English

Summary

Foreword

General Information

Exterior View of Tractor

Details the tractor's exterior components from right, left, and back perspectives.

Tractor Identification

Explains how to find and understand the engine and chassis identification numbers.

About This Manual

Provides guidance on the purpose and use of the operator's manual.

Introduction and Description

Defines the term 'tractor' and offers a general overview of the machine.

Owner Assistance and Support

Outlines procedures for obtaining support and assistance from dealers.

ROPS Safety and Usage

Covers the function, safety, and proper use of the Roll Over Protective Structure.

Seat Adjustment Guide

Instructions for adjusting the tractor seat for optimal operator comfort and safety.

Safety Precautions

Safety Instructions and Signals

Explains safety symbols, signal types (Danger, Warning, Caution), and reading instructions.

Safe Operation Practices

Provides general advice for safe operation, operator qualifications, and machine familiarity.

Do's and Don'ts for Operation

Lists recommended actions (DOs) and actions to avoid (DON'Ts) for performance and safety.

Safety Decals and Symbols

Information on safety decals, their care, and universal symbols used in the manual.

Tractor Instruments

Dashboard Switches

Details various switches on the tractor dashboard, including key, combination, and hazard switches.

Monitor Panel and Gauges

Explains the function of the monitor panel, gauges, and indicator lamps.

Control Instruments Overview

Identifies and describes the location and function of various control levers and pedals.

Three Point Linkage Components

Details the components of the three-point linkage system for attaching implements.

Operation

Engine Operation Procedures

Covers starting, stopping, and idling the engine, including cold weather considerations.

Tractor Driving and Control

Details on operating the tractor, shifting, turning, and driving on slopes.

PTO and Implement Handling

Explains PTO operation and procedures for connecting, disconnecting, and mounting implements.

Operational Checks and Tips

Covers towing, checks during driving, work procedures, and general operation tips.

Maintenance

Periodic Maintenance Schedule

Outlines the recommended schedule for checks, adjustments, and replacements.

Component Checks and Servicing

Details on checking and servicing various parts like coolant, engine oil, and transmission.

Greasing and Lubrication Points

Instructions on greasing specific parts of the tractor to ensure smooth operation.

Tractor Storage Procedures

Guidelines for storing the tractor for daily, short-term, and long-term periods.

Troubleshooting

Engine Troubleshooting

Common engine issues, their causes, and recommended actions for resolution.

Brake System Troubleshooting

Addresses problems with the brake operation and pedal return.

Steering and Hydraulic System Issues

Troubleshooting for heavy steering, vibration, and hydraulic pressure problems.

Electrical System Faults

Solutions for battery charging issues, headlamp problems, horn, and signal lights.

Farm Work Safety

Pre-Operation Safety Checks

Guidelines for safety marks, pre-use checks, and instructions before starting farm work.

Safe Work Practices and Cautions

Cautions during work, driving on farm roads, and general safety during agricultural operations.

Post-Operation and Storage Safety

Instructions after use, maintenance cautions, and tractor management for safety.

Appendix

Tractor Specifications

Detailed technical specifications including engine, transmission, and dimensions.

Standard Parts and Fluids

Lists standard parts, fuel types, and engine coolant recommendations.

Engine Emission Warranty Details

Information on the engine emission warranty, coverage, and manufacturer's period.

Related product manuals