Do you have a question about the TYM T254NH and is the answer not in the manual?
Engine Type | Diesel |
---|---|
Engine | Yanmar 3TNV80F |
Transmission | Hydrostatic |
Drive | 4WD |
PTO Speed | 540 rpm |
Fuel Tank Capacity | 6.6 gallons |
Hydraulic System Type | Open Center |
3-Point Hitch | Category 1 |
Number of Gears | 3 range |
Steering | Hydrostatic |
Engine HP | 24.7 hp |
Provides instructions for safe operation and hazard recognition.
Details on proper operational procedures and precautions for tractor use.
Lists essential guidelines for correct tractor operation and common mistakes.
Explains various safety signs and their meanings for user awareness.
Defines universal symbols used in the manual for easy understanding.
Introduction to the manual and its purpose for tractor operation.
Information on identifying the tractor model and serial number.
Overview of the tractor's origin, purpose, and basic terms.
Guidance on seeking help and support from dealers and the manufacturer.
Details on Roll Over Protective Structures for operator safety.
Explanation of the tractor's dashboard, gauges, and controls.
Information on operating the Power Take Off (PTO) system.
Details on the tractor's hydraulic system and its operation.
Instructions for operating the three-point hitch and drawbar.
Essential checks to perform before starting the tractor operation.
Step-by-step guide for starting and stopping the tractor engine.
Procedures for warming up and operating the tractor safely.
Schedule and procedures for routine maintenance and adjustments.
Instructions for servicing and maintaining the tractor's engine.
Guidance on servicing and maintaining the tractor's electrical system.
Procedures for storing the tractor for short and long terms.
Tips and advice for saving fuel and oil during tractor operation.
Common problems, their causes, and recommended remedies.
Technical specifications for the tractor model.
Information on tire types and maximum traveling speeds.
Details on fuse box layout and tractor lamp specifications.