TYM T254NH - Three-Point Hitch and Drawbar

OPERATING 3-POINT LINKAGE
■ Adjusting of the Lift Rod
Adjust the length of the lift rod by
screwing the adjusting handle
(turnbuckle) in or adjust the length of
the lift rod as necessary to set the
implement in its working position
parallel to the ground.
■ Adjusting of the Check Chain
4. THREE-POINT HITCH AND DRAWBAR
3
To adjust the check chain,
turn the turnbuckle to
lengthen or shorten the
chain. Tighten the lock nut
when the correct
adjustment is achieved.
3-19
Fixing Nut
Turn Buckle
Check Chain
Lift Rod
Lower Link
Adjusting Handle
DESCRIPTION OF OPERATING SYSTEM