►
►►
► BRAKE PEDAL
Caution
A connecting latch is provided to connect the right and left brake pedals for high
speed or road use. In the interest of safety always use it on the road or at high speed
as using one side only can cause rollovers.When servicing the tractor ensure that the
adjustment on both sides in the same.
■ Left and Right Turn Brake Pedals
– Disconnecting the pin
The left and right turn brake pedals assist when making
tight turns in a field. Use these pedals in conjunction
with the steering wheel.
■ Master Brake
– Connecting the Pin
The Brake Pedal Connecting pin is used to lock the
brake pedal together.
For Road operation the pedals must be locked together.
Connection
Disconnection
40
►
►►
► PARK BRAKE (Hand Operated Park Brake)
1. Pull the Lever fully up to engage the park brake.
2. Press the button on the end of the lever and lower the lever to
release the brake.
Traveling with the park brake on will damage the brakes.
important
►
►►
► To avoid personal injury:
○ When you leave the tractor,be sure to apply the parking brake and stop the engine
○ In applying the brakes:
-The torque of wheel axle is extremely high while creep speed is being used.Be sure to step down
on the clutch pedal completely before applying the brakes,or they will not work.
-When starting to operate the tractor,be sure to release the parking brakes.Misuse of the brakes may
cause damage to the transmission and is therefore not acceptable to TYM for coverage under the
warranty.
To Next Page
Loading...
