To Next PageTo Next Page
Need help?Do you have a question about the Tymetal Corp. TYM 1000 and is the answer not in the manual?
General| Brand | Tymetal Corp. |
|---|---|
| Model | TYM 1000 |
| Category | Gate Opener |
| Language | English |
Details safety notices, installation steps, and warnings to prevent injury or damage.
Provides guidelines for connecting the operator to the AC power source, including wire gauge and distance limits.
Details wiring requirements for control signals and accessories, emphasizing cable separation.
Defines recommended pad size, depth, and J-bolt placement for operator mounting.
Details accessing the controller and connecting the AC power supply via a disconnect switch.
Specifies the requirement for an earth ground rod for surge and lightning protection.
Guides the installer through the initial setup of limit nuts for gate travel endpoints.
Explains how to fine-tune the limit nuts for precise gate stopping positions.
Covers overview, entering/exiting programming, and general keystrokes.
Summarizes key basic programming functions and their options for quick reference.
Summarizes key advanced programming functions and their options for quick reference.
Explains how obstruction signals and reverse inputs affect gate movement.
Lists error codes, their causes, and methods for clearing them, including entrapment and communication failures.
Addresses common issues like failure to start, no movement, or limit switch timing.
Highlights critical safety precautions for users of the automatic gate system.
Explains how to safely engage and disengage the manual disconnect for power loss or maintenance.
Details UL 325 requirements for obstruction sensing devices and entrapment protection.
Outlines specific inspection and adjustment tasks to be performed every six months.
