TypeS BT530033 User Manual

11
4. The camera should be paired
within 30 seconds. If the pairing
is successful, the display will
show “Pair OK”.
5. If no camera is found, then the
display will show “Pair Fail”. In this
case, cut o power and reboot
the Dash Monitor. If you keep
receiving the “Pair Fail” message
after several attempts, please call
our technical support to assist in
troubleshooting.
ROTATE CAMERA
Tap on the setting to reverse the
camera view.
BRIGHTNESS
Swipe to adjust screen brightness

TypeS BT530033 Specifications

General

Brand	TypeS
Model	BT530033
Category	Automobile Electronics
Language	English