TypeS BT533004 - Initial Setup

8
Route and hide the power cable in the headliner and pillars in your vehicle.
7
Plug the Cigarette
Charger Cable into the
12/24V DC outlet.
Peel o the 3M tape
backer from the GPS
Receiver and mount
it on the windshield.
Position it on a surface
that allows it to get a
clear view of the sky
through the windshield
in order to get the best
signal strength.
Turn the adjustment
knob clockwise while
holding the Windshield
Mount onto the glass to
secure it on the windshield.
9. INITIAL SETUP
Set the date & time before installing and
using the dash cam. This date & time is the
time stamp for all recorded media les and
the digital clock.
OK M