11
OPTION C LOWERING INSTALLATION FOR VEHICLES WITH TRUNK OR HATCH DOOR RELEASE
1. Unscrew and remove the license plate
from your vehicle.
2. Place the Two Way Mounting Tabs behind
the license plate. Insert the Mounting nuts
through the Wireless Backup Camera mount
holes and tighten with a wrench. Reference
the Assembly Reference Example.
3. Secure the Two Way Mounting Tabs to the
vehicle using the vehicle’s license plate screws.
(This allows more clearance for nger tips to release door latch)
US Mounting PlateMounting
Screw
Two Way
Mounting Tab
Mounting
Nut
Assembly Reference:
To Next Page
Loading...
