13
FIRMWARE VERSION
Tap to check the Backup Camera’s rmware version.
UPGRADE
Tap to upgrade the Backup Camera’s rmware to
the latest version through the APP:
NOTE: - Keep your smart device connected to WiFi
in order to download the rmware.
- Make sure the APP is paired and connected
to the camera prior the upgrade.
1. Tap Start update to begin.
2. After the upgrade is done, the APP will switch
back to the live view.
RESET DEFAULT
Tap to clear all the camera settings.
CHANGE PASSWORD
Tap to change the Backup Camera’s pairing
password.
1 2
To Next Page
Loading...
Need help?
General
