13
• Values range from -2 to +2.
Motion Detection
Default Setting: OFF
• Select the level of sensitivity of the motion
detection function.
Parking Monitor
Default Setting: OFF
• The Parking Monitor allows the dashcam to
record videos when an impact is detected while
the vehicle’s engine is o. The dashcam will turn
on automatically and record a 20 second video
clip and then shutdown; when it detects another
impact, it will record another 20 second video
clip until memory card capacity is reached.
• In order to enable the Parking Monitor user
must hardwire the dashcam to the vehicle’s fuse
panel using an additional hardwire cable (sold
separately).
NOTE: Please contact our Customer Care team for
assistance on purchasing the hardwire cable. Toll-
free (866) 294-9244.
Loop Record
Default Setting: 1 Min
• The dashcam records video on a loop that
refreshes continuously. Video les will be
stored on the MicroSD card in fragments.
• Select the duration of each video le.
Time Lapse
Default Setting: OFF
• Select between normal video or time-lapse
video.
• Refer to page 18 about time-lapse recording
logic.
To Next Page
Loading...
