Mass Storage
19
14. VIEWING AND MANAGING MEDIA FILES USING A COMPUTER
USB-C Data Cable
Note: The dashcam will stop
recording when it is connected
to a computer.
Once the dashcam is connected to
a computer with the USB-C data
cable provided, the dashcam is
still under "Power On Only" mode.
Press to stop the recording and
press to get into menu > System
Setting > USB Mode and then set
the dashcam as USB Storage. The
icon on the right will show up on
the screen.
The dashcam will function as a card
reader for the computer, and it will
appear as a new USB driver. The
user can mange les in the Micro
SD card directly from the computer.
To Next Page
Loading...
Need help?
General
