When the Aircraft Status LED is solid yellow or blinking
yellow frequently, it indicates calibration is needed. The
operation can be referred to the video of calibration from
our official website: www.yuneec.com
If there is no proper calibration, the Point to Fly function
won't work even when pressing the magic button, the
Wizard™ will vibrate twice as a warning signal(it only
vibrates once in the normal condition).
Any information above might be changed due to the
software update. For the latest documents, please check
the official website
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
To Next Page
Loading...