EasyManua.ls Logo

TYPHOON wizard - FLIGHT MODES: HOME MODE & CAMERA; Home Mode Description; Camera Controls Overview; Wizard Malfunction Warning

TYPHOON wizard
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HOME MODE
When the Flight Mode Selection Switch is in the bottom
position, the aircraft will be in the Home Mode. The Aircraft
Mode LED will be solid red. To exit the Home Mode, switch
the Mode Switch to Angle/Smart Mode, then the aircraft will
stop moving and automatically hold its position (with a
suitable GPS signal/lock) and maintain a level attitude then.
In Home Mode the aircraft will fly in a straight line in the
direction of the pilots' current location, and automatically
land within 13-26 ft (4-8 m) of the pilot.
NOTICE: In this mode, the ‘Point To Fly’ Function can’t be activated.
CAUTION: Don’t switch to Home Mode when you are near
bodies of water.
NOTICE: When using Go Home function, the speed of the
aircraft will descent to 1.57MPH (0.7m/s). The pilot can
accelerate the landing speed by holding up the Wizard and
pressing and hold the [ ] button.
CAMERA CONTROLS
Any camera control including photo taking or video
recording either be operated on Wizard or on Mobile Apps,
which can be downloaded from Google Play Store or APP
Store. The detailed information can be referred to relevant
User Manuals on the official website: www. yuneec.com
NOTICE: The control radius range of camera control is
within 295 ft (90 m).
CAUTION: When using the Wizard™, if it keeps vibrating
continuously, it indicates the hardware in the Wizard™
malfunction. Please send it to the official service center for
maintenance.
PILOT LOCATION
13-26  (4-8m)
LANDING
LOCATION