Tyre ?are T650 - 4. Function; Alarm Functions

4.Function
10
When tire pressure and temperature exceeding the user-defined
safety range,the corresponding parameters and fault icons on the
monitor screen will flash,accompanied by alarm sound. You can
press any button to cancel the alarm sound ,but the fault icon
remains on and flashes until all tire failures are removed.
（High temperature alarm/Low power alarm：Interface switch to
pressure after alarming 8s and switch to temperature/low power
alarm interface automatically after 8s.Rrpeat the switching until
fault removed.)
For example,the alarm value setting by the user are as follows:
High pressure alarm value:87PSI
Low pressure alarm value:58PSI
High temperature alarm value:65℃
High pressure alarm
When the pressure of the front left tire is 96PSI (exceeding user set value)
the monitor will display as below,accompanied by alarm sound.
Low pressure alarm
When the pressure of front left tire is 45PSI(lower than user set value)
the monitor will display as below,accompanied by alarm sound.
!