Lexis Light – ET1B User’s Manual T. Rev. 0512 PM 10
5. OPERATING YOUR Lexis Light
5.1. Control panel operation features
The switch located on the right side of the handle control cover (Fig. 9/1)
will turn the power of the Lexis Light ON or OFF.
NOTE: Turn your Lexis Light switch to the OFF position when not
in use in order to conserve battery power and prevent unintentional
operation.
The top speed may be adjusted by turning the speed-adjusting knob (fig
9/3). By turning the knob to the HI position, your Lexis Light top
speed will be up to 3.7mph/6kph. When the knob is set to the LO position,
the speed will be reduced to a slow pace, ideal for less experienced
drivers and for operating indoors.
5.2. Indicator Light (Fig. 9/4)
Indicator light steady - This indicates that all is well.
Indicator light flashes slowly - The controller is functioning
correctly but batteries should be charged as soon as possible. The
Battery Gauge (Fig. 9/5) shows the charge that is left
To Next Page
Loading...
Need help?
General
