Installing the Basket Support Frame and Rear Basket
1. Assemble support frame by inserting the legs of the frame into the two
tubes located between the batteries and the seat. Make sure the frame
is secure and stable.
2. Insert the basket into the frame. Make sure it is seated straight and
secure. (See Fig. 8).
Figure 8
Moving the Scooter
When moving the scooter (without operating it), be sure to follow these
instructions:
1. Turn the power off.
2. Ensure that the scooter is in Freewheel mode. (See Fig. 3).
3. Move the scooter carefully and slowly.
4. If you wish to stop the scooter, move the lever to Drive position
Do not shift the scooter to freewheel mode when on a slope. Note:
To Next Page
Loading...
Need help?
General
