Installation
Notes for accessing documentation and downloading and
installing the m-center evaluation software:
• An Internet connection is required
• Supported Windows operating systems: Windows 7
onwards (x86 and x64 versions)
• Go to www.u-blox.com/evk-search
• Choose the EVK-G3 / EVK-G4 kit
• Under the “Documentation & resources” tab, nd relevent
documents and the m-center software
• Download and run the m-center executable
Interfaces
Two COM ports are enabled with Windows (the numbering
of the ports can be seen via the Windows Device Manager).
The serial port for AT commands is available over the rst
numbered COM port opened by the driver.
Refer to the User Guide under the “Documentation & resourc-
es” tab for a comprehensive description of the evaluation kit
features and functionalities.
Kit includes
• EVK-G35 or EVK-G45 unit
• GSM/GPRS antenna
• GNSS antenna
• Power adapter
• Headset
• USB cable
More information
For more information about the EVK-G35 and EVK-G45,
contact your nearest u-blox support:
www.u-blox.com/contact-technical-support
UBX-13002850 - R03
To Previous Page
Loading...
