u-blox C099-F9P User Manual

C099-F9P
Application Board (Rev. B)
User Guide

Abstract
The C099-F9P board enables customers to evaluate RTK operation with the ZED-
F9P high precision
GNSS receiver. The board provides short-range wireless connection via Bluetooth® or Wi-
Fi for
receiving correction data and logging via wireless connectivity.
www.u-blox.com
UBX-18055649 - R02

u-blox C099-F9P Specifications

General

Brand	u-blox
Model	C099-F9P
Category	Motherboard
Language	English

Summary

Introduction to C099-F9P

C099-F9P Quick Start Guide

Starting Up the C099-F9P

Provides essential steps to power on the board, connect to a PC, and begin basic operation with u-center.

C099-F9P Description and Components

Component Overview

Component Identification

Using the C099-F9P Board

Powering the Board

Describes various power sources available for the board, including USB, LiPo battery, and external DC input.

GNSS RF Input

User Interfaces

Outlines the available connection options and interfaces for external host connection, including USB and Arduino headers.

Rover Operation using NTRIP

PC Hosting via u-center

Explains how to use the u-center application's NTRIP client to receive RTCM corrections for RTK operation.

Mobile Hosting for NTRIP

Describes using a mobile phone with an NTRIP application to provide corrections to the C099-F9P via Bluetooth.

Pairing Host with C099-F9P

Reference Station and Rover Pairing

Wi-Fi Connection Between Two C099-F9P Boards

Details establishing a peer-to-peer Wi-Fi link between two C099 boards for reference station and rover setup.

Firmware Updates

ZED-F9P Firmware Update

ODIN-W2 Firmware Update