u-blox C099-F9P User Manual

C099-F9P - User Guide
UBX-18055649 - R02 Firmware updates Page 30 of 48
Figure 46: Saving ZED-F9P UART1 baud rate configuration to Flash
7.2 ODIN-W2 firmware update
The C099-F9P is shipped with ODIN-W2 FW5.0 standard connectivity firmware. If there is a need to
update the firmware, then users should adopt the following process.
Carefully follow the series of steps of the update process, which are described in this section.
Firstly, install and open the s-center application:
Figure 47: s-center connection setting window on opening s-center

u-blox C099-F9P Specifications

General

Brand	u-blox
Model	C099-F9P
Category	Motherboard
Language	English