C099-F9P - User Guide
UBX-18055649 - R02 Using the C099-F9P Page 16 of 48
• NAV-RELPOSNED
• NAV-SIG
• NAV-SOL
• NAV-STATUS
• NAV-SVIN
☞ See section 5.2.6 Messages view in the u-center User Guide [3]
Bluetooth serial COM port connection
Before using Bluetooth or Wi-Fi ensure that the supplied Wi-Fi/Bluetooth antenna has been
connected to the SMA connector “ODIN-RF” to ensure correct operation of the wireless functions.
The C099-F9P board is delivered with the ODIN-W2 pre-configured for connecting the ZED-F9P as a
Bluetooth serial device. On a PC, go to the Bluetooth setup and add the ODIN-W2 module as a device,
identified as “ODIN-W2-XXXX”. See Figure 16, Figure 17 below.
Figure 16: Windows 7 add a device window shows ODIN-W2
Figure 17: Click on the ODIN-W2 and select Next
To Next Page
Loading...