To Next PageTo Next Page
Need help?Do you have a question about the u-blox XPLR-AOA-3 and is the answer not in the manual?
General| Brand | u-blox |
|---|---|
| Model | XPLR-AOA-3 |
| Category | Motherboard |
| Language | English |
Lists all the components included in the XPLR-AOA-3 explorer kit.
Provides step-by-step instructions for physically assembling the kit components.
Instructions for updating the ANT-B10 firmware using the s-center software tool.
Procedure to flash firmware onto the ANT-B10 using command-line tools.
Details on configuring the ANT-B10 and testing its direction-finding capabilities.
Guide on establishing a serial connection between the ANT-B10 and a host PC.
Details the pin assignments on the ANT-B10 connector for UART communication.
Lists recommended accessories for connecting the ANT-B10 to a PC.
Overview of the EVB-ANT-1 application board and its purpose.
Block diagram and component description of the EVB-ANT-1 board.
Explains the primary applications and functions of the EVB-ANT-1 board.
Details the UART interface connections on the EVB-ANT-1 board.
Information on the default software, flashing, and web configuration of the EVB-ANT-1.
Describes the different boot modes available for the EVB-ANT-1 board.
Details the various methods for powering the EVB-ANT-1 platform.
Provides physical dimensions and mounting details for the EVB-ANT-1.
Includes important notes on hardware/software revisions, limitations, and known issues.
Introduction to the C209 tag, its features, and capabilities.
Procedures for installing software and flashing the C209 tag.
Guidance on configuring and handling the C209 tag, including AT commands.
Provides an example of how to configure u-connectLocate for tracking tags.
