u-blox XPLR-AOA-3 User Manual

XPLR-AOA-3 - User guide
Revision history Page 46 of 46 UBX-22006906 - R07
C1-Public
Revision history
Revision
Date
Name
Comments
R01
29-Mar-2022
mape
Initial release
R02
3-May-2022
mape
Noted the need to flash ANT-B10 with u-connectLocate in Software section.
Minor change in Document information and other small corrections.
R03
20-Jan-2023
mape
Restructured document, moved content to u-connectLocate AT commands
manual and ANT-B10 system integration manual. Renamed to XPLR-AOA-3
user guide. Added EVB-ANT-1 chapter and related schematics.
R04
3-Mar-2023
mape
Improvements in C209 Software and flashing. Minor corrections throughout
document.
R05
23-May-2023
mape
Updated for software version 1.0 and hardware revision C. Added notes
describing anchor accuracy and UUDF events in ANT-B10 configuration and
testing. Corrected Cortex MCU references. Added information describing
access to the Web configuration interface. Included notes describing
Limitations and known issues. Updated flashing procedure in Installing tag
software with the DFU bootloader using s-center. Updated images and added
other minor editorial changes.
R06
30-Jun-2023
mape
Added description of buttons connected to MCU in EVB-ANT-1.
R07
17-Nov-2023
lliu, mape
Updated Flashing from the Command line for ANT-B10. Added description of
how the u-connectLocate algorithm calculates the direction or angles of
moving tag in u-connectLocate software. Updated angle definitions in ANT-
B10 configuration and testing. Add information about the C209 tag being
delivered with bootloader software. Updated all XPLR-AOA-3 images to reflect
the latest hardware.
Contact
u-blox AG
Address: Zürcherstrasse 68
8800 Thalwil
Switzerland
For further support and contact information, visit us at www.u-blox.com/support.

u-blox XPLR-AOA-3 Specifications

General

Brand	u-blox
Model	XPLR-AOA-3
Category	Motherboard
Language	English