To Next PageTo Next Page
Need help?Do you have a question about the u-blox NEO-M9N and is the answer not in the manual?
General overview of the NEO-M9N GNSS receiver and its capabilities.
Describes the internal architecture and key functionalities of the NEO-M9N receiver.
Details how to configure the NEO-M9N receiver using UBX configuration interface keys.
Explains the functionality of the Satellite-Based Augmentation System (SBAS) for accuracy improvement.
Describes the geofencing feature for setting up circular areas and monitoring position.
Explains the feature allowing position fixes and byte strings to be logged in receiver flash memory.
Describes the feature to store position fixes in RAM for later retrieval in a single batch.
Details the spectrum analyzer tool for identifying noise or jammers in the reception band.
Covers the UART, I2C, SPI, and USB interfaces for communication with a host CPU.
Describes predefined General Purpose Input/Output (PIO) pins for interaction with the receiver.
Explains u-blox's AssistNow services for A-GNSS protocol and its variants.
Details different power modes to control acquisition and tracking engines for performance or power saving.
Introduces receiver clocks, time bases, and time synchronization concepts.
Describes the time pulse and timemark features for precise timing applications.
Covers air interface security, GNSS satellite integrity, and receiver self-protection features.
Explains broadcast navigation data messages and subframe structures for different GNSS.
Details how to force a receiver reset, including different reset types and modes.
Explains the process and importance of updating the receiver's firmware image.
Provides the pin layout and configuration details for the NEO-M9N module.
Details the power supply pins (VCC, V_BCKP, V_USB) and their requirements.
Shows a minimal electrical circuit for NEO-M9N operation using UART1 interface.
Lists and describes internal components like clock generation, RTC, SAW/LNA, and flash memory.
Discusses antenna requirements, design considerations, and connection for GNSS signal reception.
Covers Electrostatic Discharge (ESD) and Electrical Overstress (EOS) precautions for handling and design.
Addresses EMI issues on I/O lines and provides EMI protection measures and recommendations.
Details layout and placement requirements for optimal RF performance and interference reduction.
Provides crucial guidelines for power supply, backup battery, RF front-end, and layout.
Emphasizes strict precautions for handling Electrostatic Sensitive Devices (ESDs).
Guides on soldering paste selection, reflow soldering profiles, and rework procedures.
Describes module delivery in reeled tapes for efficient production and handling.
Illustrates tape orientation and feed direction for NEO-M9N modules.
Specifies reel quantities and type for NEO-M9N receivers.
Details the Moisture Sensitivity Level (MSL) for NEO-M9N packages according to industry standards.
General