To Next PageTo Next Page
Need help?Do you have a question about the U-Line 2175BEVOL2 and is the answer not in the manual?
General| Brand | U-Line |
|---|---|
| Model | 2175BEVOL2 |
| Category | Refrigerator |
| Height | 34 Inch |
| Depth | 23 1/4 Inch |
| Finish | Stainless Steel |
| Color | Stainless Steel |
| Door Swing | Reversible |
| Defrost Type | Automatic |
| Voltage | 115V |
| Refrigerant | R-600A |
| Width | 24 Inch |
| Door Style | Solid |
Provides general safety guidelines for appliance usage and handling.
Lists necessary tools and materials for the inspection and planning phase.
Details how to unwrap and inspect the unit for damage or defects.
Instructions for removing protective coating from stainless steel units.
Guidance on cleaning exterior surfaces of overlay and stainless steel models.
Specifies required cabinet opening dimensions for installation.
Provides detailed measurements for stainless steel and wood overlay units.
Details required door opening clearance for different models.
Specifies electrical requirements for the unit.
Outlines operating temperature and humidity guidelines.
Instructions for installing the unit next to another appliance.
Steps for removing and reinstalling wine racks from the cabinet.
Guides on staining and finishing wood trim for overlay models.
Steps to remove the controller housing for finishing.
Detailed process for applying stain and protective finish to wood trim.
Instructions for applying finish without staining.
Step-by-step guide for reversing the door swing direction.
Instructions for preparing the wood overlay frame.
Steps to prepare the wood overlay panel before attachment.
Instructions for attaching the prepared overlay panel to the door.
Guides on attaching the door assembly to the main cabinet.
How to verify the door is properly aligned with the cabinet.
Procedures for correcting door alignment issues.
Details required voltage, frequency, and amperage for power supply.
Explains the importance and method of leveling the unit.
Advice for positioning the unit into the opening.
Instructions for installing safety anti-tip brackets.
Steps for installing a single unit.
Instructions for installing the unit next to another appliance.
Common installation problems and their solutions.
Initial setup and basic operation guidance.
Addresses common issues during the initial startup phase.
Information on contacting customer support for assistance.
Details on how to obtain service and support.
