To Next PageTo Next Page
Need help?Do you have a question about the U-Line U-2175RFB-00 and is the answer not in the manual?
General| Depth | 23.5 inches |
|---|---|
| Finish | Stainless Steel |
| Energy Star Certified | Yes |
| Defrost Type | Automatic |
| Refrigerant Type | R600a |
| Door Swing | Field Reversible |
| Installation | Built-In or Freestanding |
| Width | 24 inches |
| Door Style | Reversible |
| Color | Black |
| Temperature Range | 34°F to 44°F |
| Cooling System | Forced-air cooling |
| Shelves | 3 adjustable tempered glass shelves |
Instructions to record model and serial numbers for service and warranty.
Emphasizes reading the guide before use and keeping it for future reference.
Advises checking operation and troubleshooting sections before seeking professional help.
Lists precautions for intended use, child entrapment, and electrical safety.
Explains the meaning of Danger, Warning, and Caution labels used in the guide.
Describes built-in/freestanding capability, ice/refrigeration combo, digital controls, etc.
Explains ice production, storage capacity, and water line requirements.
Identifies models using electronic vs. manual control systems.
Describes the digital display and set point temperature.
Steps to set and adjust the desired temperature for the unit.
Explains interior light operation and Sabbath mode activation.
Importance of proper airflow for unit efficiency and preventing malfunction.
Basic startup for manual models and initial ice maker use.
Explains the function of the control dial for temperature settings.
Steps for adjusting temperature using the numbered dial on manual models.
Method to verify actual internal temperature using a thermometer.
Guidance on accessing and removing storage drawers.
Instructions for operating crisper drawers safely and properly.
How the ice maker functions, including shut-off and normal sounds.
Procedure to adjust the ice cube thickness.
Instructions for ensuring the unit is properly leveled for optimal operation.
Steps for safely removing and reinstalling interior shelves.
Procedures for removing and reinstalling the unit's front grille.
Steps for removing and installing shelves located on the inside of the door.
Identifies models with self-closing versus standard door systems.
How to align and adjust doors for proper sealing.
Explains which models' doors are reversible and general process.
Detailed steps for reversing doors on specific models.
Steps to prepare the door for mounting after reversal.
Steps to mount the door back onto the unit after reversal.
Refers back to door alignment instructions on page 12.
Steps to ensure proper alignment and sealing of standard doors.
Explains which models' doors are reversible.
General process for reversing a standard door.
Instructions for installing the bottom hinge during door reversal.
Steps for preparing doors (black/white and stainless steel) for reinstallation.
Steps to install the top hinge and remount the door.
How to visually check drawer alignment (side-to-side, front-to-back, top-to-bottom).
Instructions for adjusting drawer slides for proper alignment.
Simple steps to adjust drawer slides by loosening and retightening screws.
More involved adjustment requiring repositioning slides and drilling new holes.
How to correct horizontal leveling or protrusion issues with drawers.
Steps to properly reinstall the drawer after adjustments.
Instructions for cleaning vinyl clad and stainless steel exterior surfaces.
Steps for cleaning the inside of the cabinet and removable parts.
How to manually defrost automatic defrost models.
Routine maintenance for cleaning the condenser coil.
Guidelines for preparing the unit for extended periods of non-use.
Procedures and safety warnings for disposing of the unit.
Guides on seeking service, contacting U-Line, and ordering parts.
Explains normal sounds and provides a guide for common problems and remedies.
Information on where to find additional guides and specifications.
Contact details for U-Line customer service and support.
