What to do if U-Line U-2224BEVINT-60B Refrigerator digital display functions, but unit does not cool?
If your U-Line Refrigerator isn't cooling but the digital display is working, make sure it's not in 'Showroom Mode'. To exit this mode, press and hold the COOLER icon, and within five seconds, press the LIGHT icon three times.
Why is my U-Line Refrigerator product not cold enough?
If your U-Line Refrigerator isn't cold enough, remember that air temperature isn't the same as product temperature. Try adjusting the temperature to a cooler setting. Also, check that the unit isn't in a hot area or direct sunlight, that the door is sealing properly, that the interior light hasn't been on for too long, that nothing is blocking the front grille at the bottom, and that the condenser coil is clean.
What to do if U-Line Refrigerator digital display shows 1-16 or 99?
If your U-Line Refrigerator's digital display shows 1-16 or 99, a factory test mode may be enabled. To resolve this, adjust the temperature to 99 and press the LIGHT icon.
What to do if U-Line Refrigerator is not cold enough?
If your U-Line Refrigerator isn't cold enough, remember that the air temperature isn't the same as the product temperature. Try these steps: Adjust the temperature to a cooler setting. Make sure the refrigerator isn't in a place with high ambient temperatures or direct sunlight. Check that the door closes and seals correctly. Ensure the interior light hasn't been on for too long. Check that nothing is blocking the front grille at the bottom and that the condenser coil is clean.
What to do if U-Line U-2224BEVINT-60B Refrigerator digital display works, but the unit does not cool?
If the digital display of your U-Line Refrigerator is working but the unit is not cooling, make sure the unit is not in “Showroom Mode.” You can also momentarily unplug or interrupt the power supply to the unit.
Why do the digital display and light not work on my U-Line U-2224BEVINT-60B?
If the digital display and light on your U-Line Refrigerator aren't working, first check that the unit is properly connected to a power source. If the unit is cooling, it might be in Sabbath mode.
Why is my U-Line Refrigerator product freezing?
If your U-Line Refrigerator is freezing products, especially those touching the rear wall, ensure that items are not in contact with the rear wall. You might also need to adjust the temperature to a warmer setting.
Why does my U-Line U-2224BEVINT-60B Refrigerator develop frost on internal surfaces?
If your U-Line Refrigerator develops frost on internal surfaces, remember that some frost on the rear wall is normal and will melt during the off cycle. However, if there's a build-up of 1/4” or more, manually defrost the unit and ensure the door is closing and sealing properly. High ambient temperature and excessive humidity can also produce frost.
Why does my U-Line U-2224BEVINT-60B Refrigerator develop condensation on external surfaces?
If your U-Line Refrigerator has condensation on external surfaces, it is likely exposed to excessive humidity. The moisture should dissipate as humidity levels decrease.
Why U-Line U-2224BEVINT-60B Refrigerator interior light does not illuminate?
If the interior light in your U-Line Refrigerator isn't working, the light bulb might be defective. If the unit is cooling, it may be in Blackout mode.
General| Brand | U-Line |
|---|---|
| Model | U-2224BEVINT-60B |
| Category | Refrigerator |
| Type | Beverage Center |
| Finish | Stainless Steel |
| Number of Shelves | 3 |
| Lighting | LED |
| Color | Stainless Steel |
| Installation Type | Built-In |
| Energy Star Certified | Yes |
| Width | 24 Inch |
| Temperature Range | 34°F |
| Door Swing | Right |
| Shelves | Glass |
To Next Page