U-Line 2175R - Page 142

4-63
Section 4 - Parts
Item Part No. Description
80-39011-00 Ice Maker Assembly
150-DWRCO Faceplate Assembly
1 2506* Hold switch
2 2506* Bin switch
3 2506* Valve switch
4 2917 Limit switch
5 2918 Wire harness
7 11641*† Face plate
8 18031 Bin arm
9 20044 Screw
13 31400 Stripper
14 41375 Screw, plate
15 41434 Warning label
17 68092 Thermistor
18 488360 Screw, bin, sw
19 488361* Screw, long, sw
20 488362* Screw, short, sw
21 488372*† Screw, spring and housing
22 488622* Screw, motor
23 488957*† Screw, gear
24 489128 Screw, stripper
25 544304 Water cup
26 625827 Support housing
27 625829 Clamp
28 625830 Arm lever
29 31403* Spacer, switch
30 625836*† Valve switch plate
32 627000-BLK Cover, black
33 627163*† Spring
34 627199 Screw, arm lever
35 627302† Cam
36 627375 Ejector
37 627526 Spring, bin arm
38 627680* Insulator
39 80-39015-00* Motor
41 628123-S-E75 Mold and Heater Assembly
42 628210*† Gear
43 652604 Waterline clip
44 625843-S Mold heater
* included with 150-DWRCO
† included with 80-39015-00 motor
CO2275DWR (4 of 4)