U-Line 2218RGLS-00B User Guide

USER GUIDE
Cleaning Condenser 1
u-line.com
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Cleaning Condenser
INTERVAL - EVERY SIX MONTHS
To maintain operational efficiency, keep the front grille
(plinth strip/base fascia) free of dust and lint, and clean
the condenser when necessary. Depending on
environmental conditions, more or less frequent cleaning
may be necessary.
WARNING
!
Disconnect electric current to the unit before
cleaning the condenser.
NOTICE
DO NOT use any type of cleaner on the
condenser unit. Condenser may be cleaned using
a vacuum, soft brush or compressed air.
1. Remove the grille (plinth strip/base fascia). (See
GRILLE-PLINTH INSTALLATION).
2. Clean the condenser coil using a soft brush or vacuum
cleaner.
3. Install the grille (plinth strip/base fascia).

U-Line 2218RGLS-00B Specifications

General

Type	Refrigerator
Model	2218RGLS-00B
Brand	U-Line
Cooling System	Compressor
Finish	Stainless Steel
Defrost Type	Automatic
Door Swing	Right
Installation Type	Built-In
Energy Star Certified	Yes
Voltage	115V
Color	Stainless Steel
Interior Light	LED
Lock	No
Refrigerant Type	R600a
Temperature Control	Digital
Temperature Range	34°F - 60°F