What does ER mean on U-Line Refrigerator?
If the digital display on your U-Line Refrigerator shows 'ER' or 'E' followed by a number, it could mean the door was open too long (E3 error). Ensure the door is closing properly. For other error codes, contact U-Line Customer Service.
Why is my U-Line 2224BEVS-00B Refrigerator product not cold enough?
If your U-Line Refrigerator isn't cold enough, remember that air temperature isn't the same as product temperature. Try adjusting the temperature to a cooler setting. Also, check that the unit isn't in a hot area or direct sunlight, that the door is sealing properly, that the interior light hasn't been on for too long, that nothing is blocking the front grille at the bottom, and that the condenser coil is clean.
What to do if U-Line Refrigerator digital display shows 1-16 or 99?
If your U-Line Refrigerator's digital display shows 1-16 or 99, a factory test mode may be enabled. To resolve this, adjust the temperature to 99 and press the LIGHT icon.
What to do if U-Line 2224BEVS-00B Refrigerator is not cold enough?
If your U-Line Refrigerator isn't cold enough, remember that the air temperature isn't the same as the product temperature. Try these steps: Adjust the temperature to a cooler setting. Make sure the refrigerator isn't in a place with high ambient temperatures or direct sunlight. Check that the door closes and seals correctly. Ensure the interior light hasn't been on for too long. Check that nothing is blocking the front grille at the bottom and that the condenser coil is clean.
What to do if U-Line 2224BEVS-00B digital display works, but the unit does not cool?
If the digital display of your U-Line Refrigerator is working but the unit is not cooling, make sure the unit is not in “Showroom Mode.” You can also momentarily unplug or interrupt the power supply to the unit.
Why do the digital display and light not work on my U-Line 2224BEVS-00B Refrigerator?
If the digital display and light on your U-Line Refrigerator aren't working, first check that the unit is properly connected to a power source. If the unit is cooling, it might be in Sabbath mode.
What does 1-16 or 99 mean on U-Line 2224BEVS-00B display?
If the digital display of your U-Line Refrigerator shows 1-16 or 99, a factory test mode might be on. To exit, set the temperature to 99 and press the LIGHT icon.
Why U-Line 2224BEVS-00B develops frost on internal surfaces?
If you see frost building up on the inside surfaces of your U-Line Refrigerator, a little frost on the back wall is normal and will disappear during the regular off cycle. However, if it's more than 1/4" thick, manually defrost the unit. High room temperature and humidity can cause frost, so ensure the door is closing and sealing properly.
Why is my U-Line Refrigerator freezing food?
If your U-Line Refrigerator is freezing product, especially items touching the rear wall, make sure that food isn't pressed against the back. Also, try setting the temperature a bit warmer.
Why U-Line 2224BEVS-00B interior light does not illuminate?
If the interior light in your U-Line Refrigerator isn't working, the light bulb might be defective. If the unit is cooling, it may be in Blackout mode.
General| Brand | U-Line |
|---|---|
| Model Number | 2224BEVS-00B |
| Category | Refrigerator |
| Color | Stainless Steel |
| Finish | Stainless Steel |
| Defrost Type | Automatic |
| Energy Star Certified | Yes |
| Installation | Built-In |
| Door Swing | Reversible |
| Door Type | Glass |
| Shelving | Adjustable Glass |
| Temperature Control | Digital |
To Next Page