U-Line H-1365 User Manual

PAGE 1 OF 9 1118 IH-1043
π
PALLET TRUCKS
1-800-295-5510
uline.com
STANDARD
MODEL H-1043 H-1193 H-4803 H-1484 H-1366 H-4122 H-4804 H-1779 H-2640 H-4123
Capacity 5,500 lbs. 5,500 lbs. 5,500 lbs. 5,500 lbs. 5,500 lbs. 4,400 lbs. 5,500 lbs. 3,300 lbs. 3,300 lbs. 5,500 lbs.
Max. Fork Height 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5"
Min. Fork Height 3.0" 3.0" 3.0" 3.0" 3.0" 3.0" 3.0" 3.0" 3.0" 3.0"
Fork Length 48" 48" 42" 36" 36" 36" 60" 72" 72" 96"
Overall Fork Width 27" 21" 27" 27" 21" 16" 27" 27" 21" 27"
Fork Wheel Diam.
(Polyurethane)
3" 3" 3" 3" 3" 2.75" 3" 3" 3" 3"
Steering Wheel Diam.
(Polyurethane)
7" 7" 7" 7" 7" 6.25" 7" 7" 7" 7"
Net Weight 153 lbs. 137 lbs. 149 lbs. 136 lbs. 130 lbs. 127 lbs. 210 lbs. 205 lbs. 200 lbs. 276 lbs.
LOW PROFILE
MODEL H-1365 H-1780 H-1781
Capacity 3,300 lbs. 3,300 lbs. 3,300 lbs.
Max. Fork Height 5.6" 5.6" 5.6"
Min. Fork Height 2.0" 2.0" 2.0"
Fork Length 48" 48" 48"
Overall Fork Width 27" 21" 33"
Fork Wheel Diam.
(Steel)
2" 2" 2"
Steering Wheel Diam.
(Polyurethane)
6" 6" 6"
Net Weight 182 lbs. 173 lbs. 212 lbs.
TECHNICAL DATA
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.

U-Line H-1365 Specifications

General

Brand	U-Line
Model	H-1365
Category	Utility Vehicle
Language	English

Summary

Maintenance

Oil

Check oil level every six months. Capacity is 0.3L. Use hydraulic oil ISO VG 32.

How to Expel Air from the Pump Unit

Lift control lever to DOWN, pump handle up/down to expel air from the unit.

Daily Check and Maintenance

Perform daily checks to limit wear and tear on wheels, axles, handle, forks, and controls.

Lubrication

Use motor oil or grease to lubricate all movable parts for proper function.

Safety

General Safety Instructions

Read all warning signs and instructions before operation. Do not operate unless trained.

Load Handling and Stability

Center loads on forks, not at the end. Match fork length to pallet load. Do not overload.

Body and Personnel Safety

Never place body parts in lifting mechanism or under forks. Wear gloves and safety shoes.

Troubleshooting

Forks Do Not Lift to Maximum Height

Cause: Not enough hydraulic oil. Recommendation: Add more oil.

Forks Do Not Descend

Cause: Setting screw incorrect position. Recommendation: Adjust setting screw.

Leaks

Cause: Seals worn or damaged. Recommendation: Replace seals with new ones.