U-Line H-1043 User Manual

PAGE 1 OF 9 1118 IH-1043
π
PALLET TRUCKS
1-800-295-5510
uline.com
STANDARD
MODEL H-1043 H-1193 H-4803 H-1484 H-1366 H-4122 H-4804 H-1779 H-2640 H-4123
Capacity 5,500 lbs. 5,500 lbs. 5,500 lbs. 5,500 lbs. 5,500 lbs. 4,400 lbs. 5,500 lbs. 3,300 lbs. 3,300 lbs. 5,500 lbs.
Max. Fork Height 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5"
Min. Fork Height 3.0" 3.0" 3.0" 3.0" 3.0" 3.0" 3.0" 3.0" 3.0" 3.0"
Fork Length 48" 48" 42" 36" 36" 36" 60" 72" 72" 96"
Overall Fork Width 27" 21" 27" 27" 21" 16" 27" 27" 21" 27"
Fork Wheel Diam.
(Polyurethane)
3" 3" 3" 3" 3" 2.75" 3" 3" 3" 3"
Steering Wheel Diam.
(Polyurethane)
7" 7" 7" 7" 7" 6.25" 7" 7" 7" 7"
Net Weight 153 lbs. 137 lbs. 149 lbs. 136 lbs. 130 lbs. 127 lbs. 210 lbs. 205 lbs. 200 lbs. 276 lbs.
LOW PROFILE
MODEL H-1365 H-1780 H-1781
Capacity 3,300 lbs. 3,300 lbs. 3,300 lbs.
Max. Fork Height 5.6" 5.6" 5.6"
Min. Fork Height 2.0" 2.0" 2.0"
Fork Length 48" 48" 48"
Overall Fork Width 27" 21" 33"
Fork Wheel Diam.
(Steel)
2" 2" 2"
Steering Wheel Diam.
(Polyurethane)
6" 6" 6"
Net Weight 182 lbs. 173 lbs. 212 lbs.
TECHNICAL DATA
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.

U-Line H-1043 Specifications

General

Brand	U-Line
Model	H-1043
Category	Utility Vehicle
Language	English

Summary

Operation

Control Lever

Instructions for using the control lever for raising, lowering, and moving loads with the pallet truck.

Pump Operation Adjustment

Steps to adjust the setting screw for correct fork operation, including troubleshooting for elevation and descent issues.

Maintenance

Hydraulic Oil

Guidance on checking hydraulic oil level, capacity, and recommended type for the pallet truck.

Expelling Air from Pump

Procedure to remove air from the pump unit by lowering forks and pumping the handle.

Daily Checks and Lubrication

Recommendations for daily inspections of components and lubrication of movable parts.

Safety Guidelines

General Safe Operation

Essential safety warnings and instructions for operating the pallet truck safely.

Load Handling and Capacity

Guidelines on load distribution, centering, fork length matching, and avoiding overload.

Troubleshooting

Forks Not Lifting or Descending

Causes and recommendations for issues where forks do not lift to maximum height or do not descend properly.

Leaks and Unintended Lowering

Troubleshooting for hydraulic leaks and forks descending without being lowered.