U-Line Electrical / Plumbing Specfications 14
First Time Start Up
All U-line units are shipped from the factory with controls that are
preset. No initial adjustments are required.
Once installation and leveling is complete, the unit is ready for
initial start-up and operation. Open the top drawer press and hold
the POWER icon on the display panel for aproximately ten
seconds until the °F symbol flashes and release.
U-Line recommends that the unit be allowed to run overnight
prior to loading the refrigerator with product.
Start-Up Troubleshooting
Unit does not appear to turn on POWER icon is pressed.
Make sure unit is plugged in and outlet has power (circuit breaker
has not tripped).
See the Use and Care Guide’s Troubleshooting Guide for
more solutions.