Need help?Do you have a question about the U-Line UANB115 and is the answer not in the manual?
Defines safety alert symbols like Danger, Warning, and Caution.
Specifies the required cabinet opening dimensions for installation.
Provides the overall physical dimensions of the appliance.
Instructions for installing two units side-by-side.
Covers water supply quality, pressure, and treatment options.
Step-by-step instructions for connecting the water supply line.
General guidelines for connecting the drain line, including gravity and pump options.
Details on the operation and installation of the P60 drain pump.
Securing the unit to cabinets or countertops to prevent tipping.
Securing the unit to the floor for freestanding installations.
Steps to ensure the unit is level for proper operation.
Final installation steps including power connection and cleaning.
Instructions for removing and reinstalling the front grille.
How to align the door for proper sealing and operation.
Steps to change the door swing direction.
Explains the alert for a door left open too long and its resolution.
How to clean the exterior surfaces of different model finishes.
Procedures for cleaning the inside of the appliance and its components.
Information on the automatic cleaning alert and cycle.
Steps to prepare the unit for periods of non-use.
Specific procedures for protecting the unit in freezing temperatures.
Overview of diagnostic service menu options and their functions.
List and explanation of error codes displayed by the unit.
Steps to select and program the correct model number onto the control board.
Initial checks and information gathering before contacting support.
A guide to identify and resolve common operational problems.
Steps for safely removing the base assembly for service.
Procedures for removing the gear motor and auger assembly.
Table correlating system conditions with pressure and temperature readings.
Diagram illustrating the refrigeration system components and flow.
Advanced diagnostic capabilities and troubleshooting tips for electronic controls.
Detailed guide for diagnosing and resolving operational problems.
Troubleshooting for configuration errors or board issues.
Function of the door switch and its role in error triggering.
List and explanation of error codes related to component failures.
Diagnosing water detection sensors and related errors.
Troubleshooting float switch errors and reservoir fill problems.
Diagram and explanation of the control panel buttons.
Table detailing functions, commands, and display options for controls.
How to activate and deactivate the silent operation mode.
How to activate and exit showroom display mode.
Instructions for entering and navigating the service diagnostic mode.
Steps to select and program the correct model number onto the control board.
Table providing resistance values for thermistors at various temperatures.
Covers parts and labor defects for one year from purchase.
Extends parts and labor coverage to two years for specific product classes.
Information on obtaining an additional free warranty extension.
Covers specific sealed system components for five years from purchase.
To Next Page
General