3
What you will need
To complete the installation, you will need the following items:
• A small amount of water and some general household
cleaning solution in a bucket or bowl to clean the glass, if
mounting it on a window
• A Wi-Fi router (eero Wi-Fi Router included in package)
• The network cable included in the Wi-Fi router package.
This is used to connect the Wi-Fi router to the PoE Injector.
How long it will take
The time it takes to install varies depending on how many
signal tests you perform and the size of your house, but in
general, you should set aside about 30-60 minutes to complete
the installation.
To Next Page
Loading...