INSTRUCTIONS AND PRECAUTIONS
Visit our website at: http://www.harborfreight.com
SAVE THESE INSTRUCTIONS.
READ ALL PRECAUTIONS AND INSTRUCTIONS.
Copyright
©
2009 by Harbor Freight Tools
®
. All rights reserved. No portion of this document or any artwork contained herein
may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this
document may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the
product described herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
TOOL CHEST -
TOP 6 DRAWER
67423
SPECIFICATIONS
Drawer Size
Weight Capacity
Top Tray
44 lb.
Top 3 11-1/2” x 7” x 1-3/4”
17.5 lb. ea
Middle 2 11-1/2” x 23-3/8” x 1-3/4”
26.5 lb. ea
Bottom 11-1/2” x 23-3/8” x 2-3/4”
26.5 lb.
Total Capacity: 176 lbs.
Includes lock and 2 keys
(Sold Separately).
Tool Chest made from heavyduty sheet steel with black
UNPACKING
When unpacking, make sure that the item is
intact and undamaged. If any parts are missing or
broken, please call Harbor Freight Tools at the number
shown on the cover of this document as soon as pos-
sible.
IMPORTANT SAFETY INFORMATION
Assembly Precautions
Assemble only according to these instructions. 1.
Improper assembly can create hazards.
Wear ANSI-approved safety goggles and heavy-2.
duty work gloves during assembly.
3.
-4.
bly.
Do not assemble when tired or when under the 5.
Use Precautions
This product is not a toy. Do not allow children to 1.
play with or near this item.
2.
Inspect before every use; do not use if parts 3.
loose or damaged.
Maintain product labels and nameplates. These 4.
carry important safety information. If unreadable
or missing, contact Harbor Freight Tools for a
replacement.
Do not stand or climb on this item.5.
Do not lift while loaded.6.
ASSEMBLY INSTRUCTIONS
Read the ENTIRE IMPORTANT SAFETY
INFORMATION section at the beginning
of this document including all text under
subheadings therein before set up or use
of this product.
Wear ANSI approved safety goggles when as-1.
sembling this product, and when working with
tools and equipment.
To Next Page
Need help?
General
