13 DRAWER ROLL CABINET
Assembly and Operating Instructions
Visit our website at: http://www.harborfreight.com
Read this material before using this product. Failure to do so can result in serious
injury. SAVE THIS MANUAL.
Copyright
©
2008 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required
for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Thank you for choosing a Harbor Freight Tools product! For future reference, please complete
the owner’s record below:
Model:_____________________ Purchase Date:_____________________
Save the receipt and these instructions. It is important that you read the entire instruction
sheet to become familiar with this product before you begin using it.
Technical Specifications: Maximum Weight Capacity: 2894 Lbs. Dead Weight (Evenly Distributed
Between the 13 Drawers). 2 Keys. This 13 Drawer Roll Cabinet is designed to be used side-by-
side with 7 Drawer End Cabinets (SKU 90321/91361/95404/98086) sold separately. The lip running
along the side of Cabinets 90321/91361/95404/98086 will mount on the side of this Cabinet.
Drawer Dimensions
Weight Capacity for each drawer: Drawer A(5) - 88 Lbs. 22”x15.8”x2.3”
Drawer B - 110 Lbs. 22”x15.7”x5.4”
Drawer C(5) - 88 Lbs. 11.9”x15.8”x2.3”
Drawer D - 110 Lbs. 11.9”x15.7”x5.4”
Drawer E(Top)- 121 Lbs. 36.7”x15.8”x3.9”
Weight Capacity for top panel: - 1673 Lbs.
Total 2894 Lbs.
Warning:
1. Read this instruction sheet before assembling and using the 13 Drawer Roll Cabinet.
2. Always wear ANSI approved safety goggles when working with tools and equipment.
3. Only use the Cabinet on a flat, level and solid surface that is capable of supporting the
weight of the Cabinet and its contents.
4. Do not exceed the 2894 Lbs. maximum weight capacity (dead weight) - evenly distributed
among the drawers.
Assembly: The Cabinet includes only 1 Handle. Assemble side handle using included
screws.
ALL DRAWERS MUST BE PUSHED IN FULLY BEFORE CABINET WILL LOCK.
ITEMS
90320
91363
95403
98084
Revised Manual 10e
To Next Page
Need help?
General
