Need help?Do you have a question about the UAZ UAZ-3153 and is the answer not in the manual?
General| Brand | UAZ |
|---|---|
| Model | UAZ-3153 |
| Category | Automobile |
| Language | English |
Check hood and body door lock mechanisms before driving.
Guidelines for safe handling of vehicle fluids to prevent exposure.
Safe practices for engine warming and battery management.
Avoid driving a cold engine at high speed.
Engage the oil cooler when ambient temperature exceeds 20°C.
General technical specifications and data for the automobiles.
Observe speed limits in different gears during running-in.
Do not change engine fluids during the running-in period.
Check brake drums, temperature, and bearings.
Procedures for daily inspection and maintenance of the automobile.
Maintenance tasks to perform before the summer operating season.
Maintenance tasks to perform before the winter operating season.
Periodic draining of sediment and water from the fuel filter.
Periodic checks of the fuel pump for leakage.
Periodic disassembly and cleaning of the fine fuel filter.
Maintenance of the carburettor, including jets and cleaning.
Adjusting fuel level in the carburetor float chamber.
Adjusting slow idling speed of the carburettor.
Procedures for maintaining the automobile's clutch system.
Information regarding the use and maintenance of the towing hook.
Procedures for checking and maintaining the suspension components.
How to attach the spare wheel to the vehicle.
Checking and adjusting tyre inflation pressure.
Adjusting the toe-in of the front wheels.
Checking and adjusting wheel hub bearings and flanges.
Step-by-step procedure for adjusting wheel hub bearings.
Overview and maintenance of the steering gear system.
Procedures for maintaining the hydraulic steering booster.
Checking and adjusting hydraulic steering booster belt tension.
Procedure for checking and changing hydraulic steering booster oil.
Procedures for maintaining the vehicle's service brake system.
Checks and maintenance procedures for the vehicle's alternator.
Cleaning, checking, and aiming headlamps.
Adjusting fog lamps according to specifications.
Step-by-step instructions for filling a grease gun.
Procedures for maintaining the automobile's exterior appearance.
General guidance on lubrication materials and fluids.
Operation and maintenance of the windshield wiper system.
Filling and adjusting the windshield washer system.
List of lamps used on the automobiles and their specifications.
Specifications for tightening torques of main threaded connections.
Specifications for main metering jets in the K-151B and K-151E carburettors.
To Next Page
