Do you have a question about the Ubiquiti Rocket Prism RP-5AC-Gen2 and is the answer not in the manual?
Product Name | Rocket Prism RP-5AC-Gen2 |
---|---|
Category | Accessories |
Frequency Band | 5 GHz |
Max Throughput | 450+ Mbps |
Networking Interface | (1) 10/100/1000 Ethernet Port |
Wireless Approvals | FCC, IC, CE |
RoHS Compliance | Yes |
Max. Power Consumption | 8.5W |
Operating Temperature | -40 to 70 °C |
Wind Survivability | 200 km/h |
Operating System | AirOS |
Wireless Modes | Access Point, Station |
Polarization | Dual Linear |
Power Method | Passive PoE |
Power Supply | 24V, 0.5A |
Supported Voltage Range | 20V - 26V |
Enclosure Characteristics | Outdoor UV Stabilized Plastic |
ESD/EMP Protection | ± 24 kV Contact / Air |
Mounting | Pole Mount |
Lists all items included in the product package for setup.
Ensures clear sky view for proper GPS functionality.
Use shielded Category 5+ cabling with drain wire, grounded to AC ground.
Recommends using two Ethernet Surge Protectors for outdoor installations.
Ports for connecting external antennas and GPS.
Displays status indicators for signal, GPS, LAN, and power.
Protects the device's ports.
Defines light blue LED status based on wireless signal strength thresholds.
Indicates GPS signal strength with steady blue light, requiring 3+ satellite connections.
Shows Ethernet connection and device power status indicators.
Resets the device to factory defaults or remotely via PoE adapter.
Gigabit Ethernet port for connecting power and the LAN.
Removing the port cover to access the LAN port.
Connects the device to the network via the LAN port.
Secures the device's ports after installation.
Attaches external RF cables to the device's antenna connectors.
Secures the Rocket Prism onto a RocketDish or Sector Antenna.
Connects the other end of RF cables to the mounted antenna.
Attaches the GPS antenna to its designated connector on the device.
Installs a shroud for protection and alignment.
Positions the GPS antenna on appropriate mounting hardware.
Connects the Rocket Prism to power via the Gigabit PoE adapter.
Instructions for optionally mounting the PoE adapter.
Guide to connecting and launching the UNMS app for configuration.
Important note regarding DHCP enablement for Wi-Fi connection.
Logging into the device and selecting the country for configuration.
Configuring wireless parameters like SSID, Security, and Country.
Adjusting channel width and control frequency list.
Connecting to the device using a web browser via http://setup.ubnt.com.
Entering credentials, selecting country/language, and agreeing to terms.
Restriction on country selection for US product versions due to regulations.
Emphasizes professional installation and adherence to local regulations.
Fields to assist installers in meeting regulatory requirements.
Physical size and mass of the RP-5AC-Gen2 device.
Details about Ethernet port and RF connector types.
Lists the supported operating frequency ranges for worldwide and USA.
Basic safety instructions including using specified accessories and avoiding water/storms.
Guidelines for safe electrical connection, grounding, and service.
Conditions under which the product warranty does not apply.
Procedure for returning products for replacement or repair, requiring an RMA.
Disclaims warranties and responsibilities for product use and service limitations.
Limits Ubiquiti's liability for various damages related to product use.
Explains variations in warranty terms based on local laws and rights.
States compliance with FCC Part 15 rules and conditions for operation.
Lists approved antenna types with maximum gain for FCC compliance.
States compliance with ISED Canada licence-exempt RSS standards.
Lists approved antenna types with maximum gain for ISED Canada compliance.
Warning about minimum separation distance for RF exposure.
Indicates product compliance with directives and lists country-specific notes.
European directive regarding disposal of electronic equipment.
States compliance with Directive 2014/53/EU.
Official website for product info, downloads, support, and community forums.
Access point for software and firmware downloads.