Need help?Do you have a question about the Ubiquiti Rocket M2 and is the answer not in the manual?
General| Frequency | 2.4 GHz |
|---|---|
| Throughput | 150+ Mbps |
| Operating Temperature | -30 to 75° C |
| Processor Specs | Atheros MIPS 24KC, 400 MHz |
| Wireless Approvals | FCC, IC, CE |
| RoHS Compliance | Yes |
| Antenna | External |
| Operating Humidity | 5 to 95% Non-Condensing |
| Max Data Rate | 150 Mbps |
| Interface | Ethernet |
| Antenna Connectors | 2 RP-SMA |
| Networking Interface | 1 x 10/100 Ethernet |
| Power Method | Passive Power over Ethernet (PoE) |
| Memory Information | 8 MB Flash |
| TX Power | 28 dBm |
| RX Sensitivity | -97 dBm |
| Power Supply | 24V |
| Mounting | Pole Mounting Kit Included |
| Dimensions (Alternative) | 160 x 38 mm (6.3 x 1.5 in) |
| Output Power | 28 dBm |
| Dimensions | 160 x 80 x 30 mm |
| Operating Frequency | 2.4 - 2.5 GHz |
| Weight (Alternative) | 0.5 kg (1.1 lb) |
Lists the items included in the Ubiquiti Networks Rocket Quick Start package, such as the Rocket unit, metal strap, PoE adapter, power cord, and guide.
Details the need for shielded Category 5 or above cabling, grounded through the AC ground of the PoE, for protection against outdoor environments and ESD events.
Identifies key physical parts of the Rocket device, including antenna connectors, port cover, LAN Ethernet port, and reset button.
Explains the Power LED (green for power source) and Ethernet LED (steady green for connection, flashing for activity).
Details the default wireless signal strength thresholds for each LED, indicating signal levels with different colors (red, amber, green).
Details removing the port cover, connecting the LAN Ethernet cable, and replacing the port cover for hardware installation.
Guides attaching RF cables to the Rocket's connectors and mounting the device to a dish or sector antenna.
Explains connecting RF cables from the Rocket to the antenna and attaching the protective shroud for weather protection.
Instructions on how to open the metal strap by turning the screw counter-clockwise for pole mounting.
Describes wrapping the metal strap around the pole and tightening it clockwise using a flathead screwdriver.
Details connecting the Rocket's Ethernet cable to the POE port and a LAN cable from the network to the LAN port on the PoE adapter.
Explains connecting the power cord to the PoE adapter and then to a power outlet to supply power to the device.
Steps to configure host system's Ethernet adapter with a static IP on the 192.168.1.x subnet.
Instructions on accessing the airOS web interface via a browser, entering default credentials, and agreeing to terms of use.
Highlights installer responsibility for regulatory compliance, mentioning antenna gain, cable loss, and output power fields in airOS.
Details physical dimensions, weight, port type, RF connectors, enclosure material, and certifications for the RocketM.
Lists the operating frequency ranges (MHz) for RocketM900/M2/M3/M365/M6 and RocketM5 models across different regions.
Provides essential safety instructions, including warnings against using the product submerged in water or during electrical storms.
Details electrical safety compliance, grounding requirements, use of approved power cords, and the need for qualified service technicians.
Outlines conditions under which the warranty does not apply, such as product modification, misuse, or damage due to cabling errors.
Explains the process for product returns and repairs, requiring a Return Materials Authorization (RMA) number.
Disclaims express and implied warranties, including merchantability and fitness for a particular purpose, and limitations on service availability.
Limits Ubiquiti's liability for direct, incidental, consequential, or other damages arising from product use or inability to use.
Details FCC compliance rules, device operation conditions, testing results for Class A digital devices, and approved antenna types.
States compliance with Canadian ICES-003 and RSS standards, including device operation conditions and approved antenna types.
Advises on antenna installation requirements for minimum separation distance (20 cm) from persons to comply with RF exposure limits.
Explains the meaning of CE marking for product compliance and the indication of alert signs for usage restrictions.
Provides links to official support resources, community forums, and download pages for Ubiquiti products.
Directs users to the downloads section for firmware, software, and documentation related to Ubiquiti devices.
To Next Page