To Next PageTo Next Page
Need help?Do you have a question about the Ubiquiti NanoStation M2 and is the answer not in the manual?
General| Frequency | 2.4 GHz |
|---|---|
| Throughput | 150+ Mbps |
| Networking Interface | 10/100 Ethernet Port |
| Operating Temperature | -30 to 75° C |
| Dimensions | 186 x 48 x 130 mm (7.32 x 1.89 x 5.12 in) |
| Weight | 380 g (13.4 oz) |
| RoHS Compliance | Yes |
| Operating Frequency | 2.4 GHz |
| Enclosure Characteristics | Outdoor UV Stabilized Plastic |
| Operating Humidity | 5 to 95% Non-Condensing |
| Shock and Vibration | ETSI300-019-1.4 |
| Product Name | NanoStation M2 |
| Category | Wireless Access Point |
| Wireless Standards | 802.11b/g/n |
| Frequency Range | 2.4 GHz |
| MIMO | 2x2 |
| Ethernet Ports | 1 |
| Processor | 400 MHz |
| Power Supply | 24V, 0.5A PoE |
| Processor Specs | 400 MHz |
| Wireless Approvals | FCC, IC, CE |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Antenna Type | Integrated |
| PoE | 24V Passive PoE |
| Mounting | Pole Mounting Kit included |
| Memory | 32 MB SDRAM, 8 MB Flash |
Lists the items included in the package for NanoStation M series devices.
Lists the items included in the package for NanoStation loco M series devices.
Recommends shielded Category 5 cabling with drain wire, grounded via PoE for protection.
Advises using two Ethernet Surge Protectors (ETH-SP) for outdoor installations.
Details LEDs (Power, LAN2, Signal) and ports (Secondary, Main/LAN) for NanoStation M series.
Details LEDs (Power, LAN1, Signal), ports, and controls for NanoStation loco M9 devices.
Illustrates connecting Ethernet cables and PoE adapter to the device (Steps 1-2).
Details the process of mounting the device to a pole and securing cables (Steps 5-6).
Explains power connection and provides warnings regarding switch port specifications.
Ensures host system Ethernet connection and static IP configuration on 192.168.1.x subnet.
Instructions for entering username 'ubnt', password, country, language, and accepting terms.
Highlights professional installation and local regulatory compliance for device operation.
Details dimensions, weight, gain, networking, power, and operating specs for M series.
Details dimensions, weight, gain, networking, power, and operating specs for loco M series.
Lists operating frequency bands for loco M2, loco M5, and loco M9 models.
Provides warnings against water submersion and using the product during electrical storms.
Covers compliance with power requirements, grounding, and professional servicing.
Details compliance statements and conditions for FCC and ISED Canada regulations.
Specifies radiation exposure limits and minimum installation distances.
Represents CE marking compliance and lists country-specific regulations.
Notes restrictions for 5150-5350 MHz and 5.8 GHz bands in BFWA member states.
Provides links to online resources like WEEE Compliance Statement and Declaration of Conformity.
