Ubiquiti NanoStation loco - User Manual

NanoStation loco Zip Tie
Package Contents
Installation Requirements
Shielded Category 5 (or above) cabling with drain wire should be used for all outdoor
wired Ethernet connections and should be grounded through the AC ground of the
PoE.
We recommend that you protect your networks from harmful outdoor environments
and destructive ESD events with industrial-grade, shielded Ethernet cable from
Ubiquiti. For more details, visit ui.com/toughcable
Surge protection should be used for all outdoor installations. We recommend that
you use two Ethernet Surge Protectors, model ETH-SP, one near the NanoStation
loco and the other at the entry point to the building. The ETH-SP will absorb power
surges and safely discharge them into the ground.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Summary

Package Contents

Installation Requirements

Hardware Overview

Port View

Details the physical ports on the device.

Hardware Installation

Pole Mount

Step-by-step guide for mounting the device on a pole.

Connecting Power

Accessing airOS via Wi-Fi

UNMS App

Instructions for connecting and using the UNMS mobile application.

Web Portal

Instructions for connecting and using the web-based configuration portal.

Installer Compliance Responsibility

Specifications

Basic Wireless Settings

Overview of fundamental wireless network settings.

Wireless Security

Configuration options for securing the wireless connection.

Secondary SSID

Settings for configuring a secondary wireless network identifier.

Advanced

Advanced configuration parameters for fine-tuning performance.

Safety Notices

Electrical Safety Information

Limited Warranty

Compliance

FCC

Details regarding compliance with Federal Communications Commission rules.

ISED Canada

Details regarding compliance with ISED Canada regulations.

CE Marking

WEEE Compliance Statement

Declaration of Conformity

Online Resources

Ubiquiti NanoStation loco Specifications