Need help?Do you have a question about the Ubiquiti NanoStation5 and is the answer not in the manual?
General| Model | NanoStation5 |
|---|---|
| Category | Wireless Access Point |
| Max Data Rate | 150 Mbps |
| Antenna Gain | 8 dBi |
| RoHS Compliance | Yes |
| Output Power | 27 dBm |
| Shock and Vibration | ETSI300-019-1.4 |
| Wireless Standards | 802.11n |
| Power Supply | 24V, 0.5A PoE |
| Processor Specs | 400 MHz |
| Memory Information | 8 MB Flash |
| Networking Interface | 10/100 Ethernet |
| Wireless Approvals | FCC, CE, IC |
| Antenna | Dual Polarized |
| Operating Temperature | -30 to 75 °C |
| Operating Humidity | 5 to 95% (non-condensing) |
| Power Method | Passive PoE |
| Mounting | Pole |
| Weight | 0.4 kg (0.88 lbs) |
Details on processor, memory, and networking interface of the device.
Information regarding FCC, IC, and CE compliance standards.
Specifies TX and RX power and sensitivity for 5.475-5.825GHz band.
Details on the device's range capabilities and parameters.
Provides antenna gain, polarization, VSWR, and beamwidth information.
Covers enclosure size, weight, power, temperature, and humidity.
Lists all items included in the product packaging.
Illustrates and describes various methods for mounting the device.
To Next Page