Need help?Do you have a question about the Ubiquiti Nanostation loco M2 and is the answer not in the manual?
General| Frequency | 2.4 GHz |
|---|---|
| Antenna Gain | 8 dBi |
| Throughput | 150+ Mbps |
| Processor | Atheros MIPS 24KC, 400 MHz |
| Memory | 32 MB SDRAM, 8 MB Flash |
| Operating Temperature | -30 to 75° C (-22 to 167° F) |
| Wireless Standards | 802.11b/g/n |
| Max Data Rate | 150 Mbps |
| TX Power | 23 dBm |
| RX Sensitivity | -96 dBm |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| RoHS Compliance | Yes |
| Mounting | Pole Mounting Kit Included |
| Networking Interface | 10/100 Ethernet |
| Power Supply | 24V, 0.5A PoE |
| Operating Humidity | 5 to 95% Non-condensing |
| Wireless Approvals | FCC, IC, CE |
| Dimensions | 163 x 31 x 80 mm (6.42 x 1.22 x 3.15") |
Lists items included in the product package for setup and use.
Specifies necessary tools and cabling for installing the device correctly.
Explains the function and meaning of the device's indicator lights for status monitoring.
Provides essential guidelines for safe electrical connection and handling of the equipment.
Outlines the conditions under which the product warranty remains valid.
Provides guidance on how to handle product returns in case of defects.
Alerts users about radio frequency energy exposure and safe operating distances.
Explains the CE mark indicating product compliance with applicable directives.
Refers to the notified body number for conformity assessment procedures.
Lists various online channels for obtaining support, guides, and downloads.
To Next Page
